Categories
Thunderhead Creations (THC) x Mikevapes - Blaze AIO Boro MOD
138.7 €
/ Ks
114.66 € excl. VAT
138.7 €
/ Ks
114.66 € excl. VAT
138.7 €
/ Ks
114.66 € excl. VAT
A great Boro AIO mod created by Thunderhead Creations in cooperation with a youtuber Mike Vapes offering up to 88W of power and great craftsmanship.
Related products
In stock
1 199 €
Product description
Thunderhead Creations and Mike Vapes are an inseparable duo. The result of their collaboration is always an absolutely brilliant piece of equipment. Now it is definitely no different with Blaze AIO Boro MOD. This is a regulated mod with support for Boro R4 atomizers, up to 88 watts of power, and a single 18650 battery slot that can be conveniently charged directly in the mod using the USB-C connector.
The device offers a sleek look and small footprint. These are 85 x 50.5 x 23 mm. The body is made of aluminum alloy. On the front, you will find a 0.69" OLED display and two buttons for controlling the user interface.The fire button has a convex shape for better ergonomics. However, if the fire button does not suit you, you will find a flat one in the package that can be easily replaced by the user. Alternatively, you will also find a battery tube with perforated holes in the package. A tube with a carbon fiber sleeve is pre-installed. On the side, you will find a slot for air access. The back side is then reserved for a panel hiding the Boro tank. This is a pull-out and secured by magnets in the closed position.
The mod boasts a predominantly mechanical construction. The manufacturer has chosen a chipset that provides power in the range of 5-88 W. It also supports temperature control and a variety of protections. The main attraction is the waterproof PCB of the electronics. Thus, you don't have to worry about any liquid leaking into the device.
The device requires one 18650 battery (not included) to operate. If charging is required, this can be done directly in the mode and very quickly thanks to the 5V/2.5A charging via the USB-C port.
Parameters:
Dimensions: 85 x 50,5 x 23 mm
Material: aluminium alloy
Power range: 5 - 88 W
Voltage range: 0.5 - 9 V
Resistance range: 0.08 - 3.15 ohm
Battery: 18650 (not included)
Package Contents:
1x Blaze Boro MOD
1x Flat glow button
1x Spare tube for battery (honeycomb)
1x Screwdriver
1x Spare screws
1x Spare gasket
Manufacturer: Thunderhead Creations (THC)
The device offers a sleek look and small footprint. These are 85 x 50.5 x 23 mm. The body is made of aluminum alloy. On the front, you will find a 0.69" OLED display and two buttons for controlling the user interface.The fire button has a convex shape for better ergonomics. However, if the fire button does not suit you, you will find a flat one in the package that can be easily replaced by the user. Alternatively, you will also find a battery tube with perforated holes in the package. A tube with a carbon fiber sleeve is pre-installed. On the side, you will find a slot for air access. The back side is then reserved for a panel hiding the Boro tank. This is a pull-out and secured by magnets in the closed position.
The mod boasts a predominantly mechanical construction. The manufacturer has chosen a chipset that provides power in the range of 5-88 W. It also supports temperature control and a variety of protections. The main attraction is the waterproof PCB of the electronics. Thus, you don't have to worry about any liquid leaking into the device.
The device requires one 18650 battery (not included) to operate. If charging is required, this can be done directly in the mode and very quickly thanks to the 5V/2.5A charging via the USB-C port.
Parameters:
Dimensions: 85 x 50,5 x 23 mm
Material: aluminium alloy
Power range: 5 - 88 W
Voltage range: 0.5 - 9 V
Resistance range: 0.08 - 3.15 ohm
Battery: 18650 (not included)
Package Contents:
1x Blaze Boro MOD
1x Flat glow button
1x Spare tube for battery (honeycomb)
1x Screwdriver
1x Spare screws
1x Spare gasket
Manufacturer: Thunderhead Creations (THC)
Product parameters
Category:
Type of mode:
Battery count:
Type of battery:
Vaping Modes:
IP
Ivo Peša
03.05.2024
No questions in help room
Tlačítko žhavení jde poměrně ztuha. Zkouška dvou BORO tanku, Ether boro vůle na výšku - přizvednutí spodního kontaktu nedělá dobrotu , kolísá odpor. Ambion Mods Bishop3 Cubert se tam sotva vejde, na výšku i šířku vůle 0,1 mm. Žhavení výborné , menší display , jinak super, oproti Stubbe se nevytváří žádný kondenzát.