Categories
Steam Crave Titan V2 300W Combo kit s atomizérem Titan RDTA V2
Looking for a DL DIY set-up that won't limit you? We have the solution! The Steam Crave Titan V2 300W Combo Kit combines tremendous power with up to 32ml of atomizer capacity.
Related products
In stock
6,90 €
In stock
8,10 €
In stock
8,10 €
Product description
Steamcrave Titan V2 Combo kit is a DIY kit without any compromises. It combines the high-performance Titan V2 mode with the eponymous RDTA dual-coil atomizer and up to 32ml capacity.
The Titan 300W V2 offers uncompromising performance, series connection of two, or parallel connection of four 18650 cells. The redesigned chipset offers a simple user interface and a range of protections. Although the battery configuration may give the impression of truly gigantic dimensions, the mode is relatively reasonable: 91.4 x 41 x 53.6 mm. It can handle any atomizer up to 41 mm in diameter without overlap.
In terms of design, it's a relatively straightforward look complemented by ergonomic elements that nonetheless allow this block to be comfortable to hold. The mod is superbly crafted. The body is made of aluminum alloy. It is thus very robust. All the controls: the colour display, the glow button and the buttons to move through the menus are located on the front. The battery door is located at the bottom.
The mod hides a redesigned Titan chipset in its guts. Apart from the already mentioned 300W of power, it also offers protection against low voltage, overvoltage, short circuit, overheating, long glow time and bad battery polarity. The user interface is shown on a colour display and has simple graphics. You can easily read all important parameters. The only output mode is the voltage, which can be regulated from 1 to 8.4 V in 0.1 V steps. However, the display also shows the real power output, which can also be controlled, just below the voltage value.
The mode can be operated on two cells in series, or on four 18650 cells in parallel (not included), where the two cells are still in series. The mod does not have a USB connector. An external charger is therefore required to charge the cells. To use full power, all four batteries must be plugged in (when two are plugged in, the maximum voltage is 4.2V).
The flavour of the kit is the famous Titan V2. It is characterized by the best possible flavor rendering and high steam production. Also in this case, the company has bet on its proven concept of combining RDA and RTA to form RDTA. The diameter of the atomizer is 41mm.
In terms of design, it's a relatively straightforward look complemented by ergonomic elements that still make this block comfortable to hold. The mod is superbly crafted. The body is made of aluminum alloy. It is thus very robust. All the controls: the colour display, the glow button and the buttons to move through the menus are located on the front. The battery door is located at the bottom.
The mod hides a redesigned Titan chipset in its guts. Besides the already mentioned 300W of power, it also offers protection against low voltage, overvoltage, short circuit, overheating, long glow time and bad battery polarity. The user interface is shown on a colour display and has simple graphics. You can easily read all important parameters. The only output mode is the voltage, which can be regulated from 1 to 8.4 V in 0.1 V steps. However, the display also shows the real output right below the voltage value, which can also be controlled.
The mode can be operated on two cells in series, or on four 18650 cells in parallel (not included), where the two cells are still in series. The mod does not have a USB connector. An external charger is therefore required to charge the cells. To use full power, all four batteries must be connected (when two are connected, the maximum voltage is 4.2V).
The atomizer of the set is the famous Titan V2. It is characterized by the best possible flavor rendering and high steam production. Here too, the company has relied on its proven concept of combining RDA and RTA to form RDTA. The diameter of the atomizer is 41mm.
Design-wise, it is again a perfect balance of elegance and straightforwardness. More advanced, however, is the airflow arrangement, which instead of a gradually expanding airflow hole contains three variations of stylish-looking holes. You can therefore choose between one, two or three airflow strips, which also reveal a series of split openings. This concept is aesthetically pleasing, but so is the functionality.
The spirals are inserted into the large build deck by means of recessed contacts. And you'll find six contacts inside, allowing you to install the coilsin several ways. The base is suitable for two coils, which can be connected either in classic parallel (the resulting resistance is equal to half the resistance of one coil) or in series (the resulting resistance is equal to twice the resistance of one coil). There's more than enough space here, so enjoy your large coils with a huge amount of wool for maximum vapor production and the best flavor. Also included is a Dual Mesh build deck.
The volume of the atomizer in the basic configuration is 20ml and can be increased up to 32ml with the included glass and longer chimney. The atomizer is filled from the top. The filling holes are located under the unscrewable topcap.
Parameters:
MOD:
Dimensions: 91 x 53.6 x 4mm
Power: up to 300W
Output mode: voltage.
Output voltage range: 1.0-8.4V
Resistance range: 0.1-3.0ohm
Material: aluminum alloy
Color TFT display
Battery: 2 x 18650 / 4 x 18650 (not included)
Atomizer diameter without overlap: ≤ 41mm
Atomizer:
Dimensions: 64.5 x 41mm
Volume: 20/32ml
Base: dual spiral, postless + Dual Mesh base set
Driptip: 810
Materials: stainless steel, pyrex
Package Contents:
1x Titan 300W V2 MOD
1x Titan V2 RDTA
1x Dual Mesh deck kit
1x 20ml glass
1x 32ml glass
1x protective silicone ring for glass
1x accessory set
1x instructions
Manufacturer: Steam Crave
The Titan 300W V2 offers uncompromising performance, series connection of two, or parallel connection of four 18650 cells. The redesigned chipset offers a simple user interface and a range of protections. Although the battery configuration may give the impression of truly gigantic dimensions, the mode is relatively reasonable: 91.4 x 41 x 53.6 mm. It can handle any atomizer up to 41 mm in diameter without overlap.
In terms of design, it's a relatively straightforward look complemented by ergonomic elements that nonetheless allow this block to be comfortable to hold. The mod is superbly crafted. The body is made of aluminum alloy. It is thus very robust. All the controls: the colour display, the glow button and the buttons to move through the menus are located on the front. The battery door is located at the bottom.
The mod hides a redesigned Titan chipset in its guts. Apart from the already mentioned 300W of power, it also offers protection against low voltage, overvoltage, short circuit, overheating, long glow time and bad battery polarity. The user interface is shown on a colour display and has simple graphics. You can easily read all important parameters. The only output mode is the voltage, which can be regulated from 1 to 8.4 V in 0.1 V steps. However, the display also shows the real power output, which can also be controlled, just below the voltage value.
The mode can be operated on two cells in series, or on four 18650 cells in parallel (not included), where the two cells are still in series. The mod does not have a USB connector. An external charger is therefore required to charge the cells. To use full power, all four batteries must be plugged in (when two are plugged in, the maximum voltage is 4.2V).
The flavour of the kit is the famous Titan V2. It is characterized by the best possible flavor rendering and high steam production. Also in this case, the company has bet on its proven concept of combining RDA and RTA to form RDTA. The diameter of the atomizer is 41mm.
In terms of design, it's a relatively straightforward look complemented by ergonomic elements that still make this block comfortable to hold. The mod is superbly crafted. The body is made of aluminum alloy. It is thus very robust. All the controls: the colour display, the glow button and the buttons to move through the menus are located on the front. The battery door is located at the bottom.
The mod hides a redesigned Titan chipset in its guts. Besides the already mentioned 300W of power, it also offers protection against low voltage, overvoltage, short circuit, overheating, long glow time and bad battery polarity. The user interface is shown on a colour display and has simple graphics. You can easily read all important parameters. The only output mode is the voltage, which can be regulated from 1 to 8.4 V in 0.1 V steps. However, the display also shows the real output right below the voltage value, which can also be controlled.
The mode can be operated on two cells in series, or on four 18650 cells in parallel (not included), where the two cells are still in series. The mod does not have a USB connector. An external charger is therefore required to charge the cells. To use full power, all four batteries must be connected (when two are connected, the maximum voltage is 4.2V).
The atomizer of the set is the famous Titan V2. It is characterized by the best possible flavor rendering and high steam production. Here too, the company has relied on its proven concept of combining RDA and RTA to form RDTA. The diameter of the atomizer is 41mm.
Design-wise, it is again a perfect balance of elegance and straightforwardness. More advanced, however, is the airflow arrangement, which instead of a gradually expanding airflow hole contains three variations of stylish-looking holes. You can therefore choose between one, two or three airflow strips, which also reveal a series of split openings. This concept is aesthetically pleasing, but so is the functionality.
The spirals are inserted into the large build deck by means of recessed contacts. And you'll find six contacts inside, allowing you to install the coilsin several ways. The base is suitable for two coils, which can be connected either in classic parallel (the resulting resistance is equal to half the resistance of one coil) or in series (the resulting resistance is equal to twice the resistance of one coil). There's more than enough space here, so enjoy your large coils with a huge amount of wool for maximum vapor production and the best flavor. Also included is a Dual Mesh build deck.
The volume of the atomizer in the basic configuration is 20ml and can be increased up to 32ml with the included glass and longer chimney. The atomizer is filled from the top. The filling holes are located under the unscrewable topcap.
Parameters:
MOD:
Dimensions: 91 x 53.6 x 4mm
Power: up to 300W
Output mode: voltage.
Output voltage range: 1.0-8.4V
Resistance range: 0.1-3.0ohm
Material: aluminum alloy
Color TFT display
Battery: 2 x 18650 / 4 x 18650 (not included)
Atomizer diameter without overlap: ≤ 41mm
Atomizer:
Dimensions: 64.5 x 41mm
Volume: 20/32ml
Base: dual spiral, postless + Dual Mesh base set
Driptip: 810
Materials: stainless steel, pyrex
Package Contents:
1x Titan 300W V2 MOD
1x Titan V2 RDTA
1x Dual Mesh deck kit
1x 20ml glass
1x 32ml glass
1x protective silicone ring for glass
1x accessory set
1x instructions
Manufacturer: Steam Crave
Product parameters
Inhalation Method:
DL - Direct Lung Inhalation (Hookah Style)
Diameter:
35 mm and Larger
Build Deck:
Dual Coil / Mesh Deck
Type of mode:
Electronic Mod
Method of Firing:
Firing by Button
Features:
Colour Display
Battery count:
2 batteries / 4 batteries
Atomizer Type:
RDTA
Type of battery:
18650
Atomizer Airflow:
Bottom
Vaping Modes:
Voltage (VV)
No questions in help room
